Operator Training Videos
Step-by-step video walkthroughs covering safe startup, operation, and shutdown procedures for every machine in our lineup.
Press play on any machine below for a step-by-step walkthrough of safe startup, operation, and shutdown. For complete specifications, always reference the Operator’s Manual that came with your equipment.
Training Video Library
Filter by brand or equipment type to find the right video for your machine.
Watch Video
Factory Cat Ride-On Series
Ride-On Floor Scrubber
Covers pre-operation inspection, startup sequence, scrub deck adjustment, and end-of-shift shutdown and tank draining.
Watch Video
Factory Cat Walk-Behind Series
Walk-Behind Floor Scrubber
Covers brush or pad selection, solution tank fill, operating controls, turning technique, and post-use rinse procedure.
Watch Video
PowerBoss Apex
Ride-On Floor Sweeper
Covers hopper capacity checks, brush engagement, sweeping patterns, debris hopper dumping, and filter shake-out.
Watch Video
PowerBoss Armadillo
Ride-On Floor Sweeper
Covers dust control system setup, side brush adjustment, heavy debris handling, and hopper dump procedure.
Watch Video
PowerBoss IC Scrubber
Internal Combustion Floor Scrubber
Covers engine startup, brush pressure settings, solution flow rate, recovery tank monitoring, and safe shutdown.
Watch Video
PowerBoss IC Sweeper
Internal Combustion Floor Sweeper
Covers fuel and oil checks, brush height adjustment, sweeping path technique, hopper emptying, and filter maintenance.
Watch Video
PowerBoss Phoenix
Walk-Behind Floor Scrubber
Covers pad driver or brush installation, tank fill procedure, control panel operation, and end-of-shift cleaning routine.
Watch Video
PowerBoss Scrubmaster
Ride-On Floor Scrubber
Covers battery or charge check, solution and recovery tank prep, deck lowering, operating speed, and post-use rinse.