Autonomous Scrubbers
And Sweepers

Let it work while you work. Big Ox, KEMARO, and PowerBoss robots clean your facility on a schedule you set with no one needed to operate it.

Meet The Fleet

KEMARO K900 Gen II autonomous sweeping robot

KEMARO K900 Gen II

Autonomous Floor Sweeper

A Swiss-built sweeping robot that clears dust and debris around the clock without water or chemicals. It self-cleans its own filter, warns nearby workers and forklifts with a BlueSpot light, and can move itself between rooms on its own.

  • 35″ (90cm) sweep path
  • Up to 1,000 m²/h
  • Up to 4 hrs runtime
  • Dry — no water or chemicals
  • Self-cleaning filter
  • Swiss-built

Learn More

Big Ox Ai-32 autonomous floor scrubber, rear view, in a warehouse aisle

Big Ox Ai 32

Autonomous Floor Scrubber

Built to run 13+ hours a day, or straight through the night, with nobody behind the wheel. Layered LiDAR and camera sensors handle navigation; the cylindrical deck scrubs and sweeps in the same pass.

  • 32″ cleaning path
  • 40 / 50 gal tanks
  • 13+ hrs/day
  • LiDAR + 3D + RGB-D nav
  • 5-layer auto self-dock
  • No subscription fee

Learn More

PowerBoss ScrubMaster AMR autonomous floor scrubber

PowerBoss Scrubmaster AMR

Autonomous Floor Scrubber

BrainOS-powered vision AI handles the routine cleaning, and it still converts to a manual ride-on scrubber whenever you need hands-on control.

  • BrainOS navigation
  • Up to 24,500 sq ft/hr
  • Converts to manual ride-on

Learn More

How It Works

1

Map The Space

Walk the robot through your facility once. It builds a precise digital route from that single pass.

2

Set The Schedule

Run it during your shift, after hours, or straight through the night — your call.

3

Walk Away

The robot cleans, avoids obstacles, and returns to dock and recharge on its own.

Why Go Autonomous

They handle the repetitive floor work so your team doesn’t have to.

Labor Efficiency

Let the robot handle repetitive floor work while your team focuses on higher-value tasks.

Consistent Clean

Program routes once, get the same high-quality result every run — no missed spots.

Smart Navigation

LiDAR and camera sensors keep operation safe around people, obstacles, and changing spaces.

Bortek Support

From setup to ongoing maintenance, our team keeps your autonomous cleaning program running.

FAQ

Do I need a scrubber, a sweeper, or both?

Depends on the floor. Spills, grime, or sticky residue call for a scrubber — Big Ox or PowerBoss. Mostly dust and loose debris? A sweeper like the KEMARO K900 does the job without water or downtime.

Does someone need to supervise it while it runs?

No. Once a route is mapped, both machines navigate, avoid obstacles, and return to dock on their own. Someone still handles routine emptying, refilling, and maintenance.

What happens if it runs into a person or a forklift?

Both KEMARO and Big Ox carry LiDAR and 3D sensors to detect obstacles and stop or reroute automatically. KEMARO also uses a BlueSpot light to signal its position to nearby workers and drivers.

How long does mapping a new facility take?

One supervised walkthrough of the space is enough to build the cleaning route. Bortek’s team handles setup and initial mapping.

What floor types do these work on?

Concrete, epoxy, VCT, tile, and most other hard commercial or industrial floors. Ask us about your specific surface if you’re not sure.

Is there a subscription fee?

Big Ox and KEMARO have no subscription fees.

Can it run lights-out, with nobody else in the building?

Yes. Big Ox and KEMARO are both built for unattended shifts, including overnight.

See Them Work Before You Buy

Bring a Bortek rep to your floor for a live demo with our autonomous cleaning equipment. No obligation.

Schedule A Demo