Bortek becomes Authorized Dealer of KEMARO

Bortek Industries, Inc.

Bortek Adds KEMARO Autonomous Sweepers to Its Equipment Lineup

The KEMARO K900 Gen II is a low profile autonomous sweeper that runs on its own schedule and cleans under racking where ride-on sweepers can’t fit.

The KEMARO K900 Gen II product reveal, sweeping the warehouse at our corporate headquarters in Mechanicsburg, PA.

Bortek Industries is now an authorized dealer for KEMARO, the Swiss company that builds autonomous sweeping robots for industrial floors. We carry the K900 Gen II, a robot that stands 13.8 inches tall, sweeps the places your current equipment can’t reach, and runs on the cleaning schedule you set. The video above shows it at work in our own headquarters warehouse.

The Low-Profile Advantage

It Cleans Where Your Sweeper Can’t Fit

Most warehouses share the same blind spot: the floor under the racking. Ride-on sweepers and scrubbers cover the main aisles, but they can’t fit under a rack, so pallet shards, shrink wrap, cardboard, and dust build up underneath. Cleaning it by hand means someone crawling under steel with a broom, so it often gets skipped.

The K900 Gen II stands 13.8″ (35 cm) tall on a 31″ × 28″ footprint. That height gets it under racking and shelving that a ride-on machine has to steer around, and at 70.5 lbs (32 kg), it’s light enough for floors with weight restrictions.

13.8″
Height (35 cm)
35″
Sweep Path (90 cm)
10,000+
Sq Ft per Hour
70.5 lbs
Weight (32 kg)

Debris left under racks doesn’t stay there. Forklift and pallet jack wheels drag it back into the aisles, sharp scraps wear down wheels, and dust settles on stored product. Sweeping under the racks on a schedule stops that cycle.

In the field: A leading U.S. discount retailer had this exact problem. Its scrubbers covered the main aisles, but dense roller racking and 300,000 sq ft of mezzanine went uncleaned for weeks because sweeping under racks was a head-injury risk. The company chose the K900 Gen II for its low-profile design and plans to expand KEMARO across several distribution centers.

Why Autonomous

It Sweeps While Your Crew Works

Autonomous starts with setup and every K900 goes through the same five steps:

  1. 1Install the charging station.
  2. 2Map the environment.
  3. 3Set the parameters.
  4. 4Define the zones.
  5. 5Set up cleaning schedules.

After setup, the K900 Gen II takes over the repetitive sweeping that eats up labor hours, and it does the job the same way every shift.

  • No operator. The K900 leaves its charging station on schedule, cleans its zones, moves between connected rooms, and returns to charge on its own. Its map updates live as pallets and equipment move.
  • Built to work around people and forklifts. LiDAR and 3D sensors read the environment in real time, so the K900 steers around people, equipment, and obstacles. The BlueSpot safety light alerts nearby employees and forklift drivers when the robot is moving.
  • Dry floors, no chemicals. The K900 sweeps and vacuums dust and debris without water or chemicals and leaves a dry floor behind. Its Automatic Filter Cleaner keeps the filter clear on its own.
  • Live monitoring and reporting. KEMARO Sphere tracks status, performance, and cleaning reports for every robot.
  • Data stays protected. KEMARO hosts Sphere data in Switzerland under GDPR and Swiss data protection law and logs every remote access. Onboard navigation keeps the robot cleaning if your network drops.
  • Lower cleaning costs. The K900 cuts cleaning costs by up to 50% per year.

KEMARO K900 Gen II autonomous sweeper on an industrial floor
After the initial mapping, LiDAR and 3D sensors guide the K900 Gen II through its zones without an operator.

Where It Works

Industries and Applications

The K900 Gen II is built for large indoor facilities with dry debris and dust on hard floors.

  • Logistics & warehousing: Under racking, pick aisles, block storage, and mezzanines, where cardboard, shrink wrap, and pallet shards collect.
  • Wood production: Sawdust and wood chips around machinery and production lines.
  • Metal manufacturing: Metal filings and dust across production floors and storage areas.
  • Food & nutrition: Production floors, packaging areas, and storage spaces, with no water or chemicals.
  • Automotive: Production floors, assembly lines, and parts storage, with navigation around machinery, robots, and vehicles.

The K900 Gen II is a dry sweeper. It does not sweep liquids, and it is not approved for ATEX (explosive atmosphere) zones. For wet cleaning, pair it with the Big Ox Ai 32 autonomous floor scrubber, or compare both on our autonomous scrubbers and sweepers page.

KEMARO K900 Gen II sweeping in an industrial facility
A 35″ (90 cm) sweep path covers 10,000+ sq ft/h (1,000+ m²/h).

The Manufacturer

About KEMARO

KEMARO AG started in 2016 in Eschlikon, Switzerland, when engineers Thomas Oberholzer, Martin Gadient, and Armin Koller set out to automate industrial floor cleaning. They built their first robot inside a shipping container. The name is short for Kehrmaschinen-Roboter, German for “sweeping robots.”

Today, more than 1,000 KEMARO robots work in facilities across 26 countries, and KEMARO still engineers and assembles every one in Eschlikon. Its U.S. subsidiary, KEMARO Americas, supports customers across North America.

KEMARO focuses on one job: autonomous dry cleaning for industrial floors. The K900 shows it in the details, from the self-cleaning filter to the 9.2 gal (35 L) debris container to navigation built for live warehouse and production floors. Learn more on our KEMARO page.

KEMARO K900 autonomous industrial sweeper
Engineered and assembled in Eschlikon, Switzerland.

Why Bortek

Sweepers Are What We Do

Bortek is a family-owned company that has sold, rented, and serviced industrial cleaning equipment from Mechanicsburg, PA since 1967. Sweepers are the core of that business. KEMARO fills the one gap our ride-on sweepers can’t: the floor under the racks.

  • We run one ourselves. The video above shows the K900 Gen II sweeping our own headquarters warehouse.
  • Local service. Our technicians work out of our Mechanicsburg headquarters and our Pittsburgh, NJ & NY, and Southern Service Centers.
  • One dealer for the whole floor. Pair the K900 with a floor scrubber or an autonomous scrubber, plus rentals, parts, service, and floor-care chemicals, all from Bortek.

KEMARO K900 service at Bortek Industries
Service, parts, and support from the Bortek team.

Want to See It Sweep Your Facility?

Talk to a Bortek equipment specialist about a free K900 Gen II demo.